Deep groove ball bearings have a wide range of applications. They are suitable for the selection of fast and ultra high speed machines, incorporating radial and axial loads from both routes, and require minimal maintenance. Widely used in industries such as transmissions, instrument equipment, motors, and electrical products.

On the one hand, it is also important to choose suitable bearings and ensure the standardized use of deep groove ball bearings. If the selection is not correct and can be used properly, the bearing cannot be used for a long period of time before its service life. In such cases, it is very easy to cause the bearing to rupture or burst.

Deep groove ball bearing

On the other hand, there are also unexpected early damages, which cannot be avoided due to the initial damage caused by the application. As the main reason for this initial damage, there are insufficient considerations for application lubrication, resulting in the entry of dirt, large deviation and deflection values of bearing installation, and insufficient scientific research on the shaft and bearing bag. It can be said that there is a significant overlap between these factors. Therefore, it is necessary to have a deep understanding of the equipment used in bearing applications, the scope of application, and the structure of the bearing field. If the situation before and after a safety accident can be understood, and then based on the damage status and various reasons of the bearing, similar accidents can be prevented from happening again.

The detailed introduction on the standardized use and maintenance significance of deep groove ball bearings above, if we firmly remember the above few detailed introductions during use, will be helpful for the normal maintenance and operation of the machine.